Single-line schematic

Single-line schematic software for switchboards

Do not draw the schematic a second time. DINPanel prepares it from the switchboard you have designed, with circuit descriptions, a symbol legend and your company details.

  • Drawing sheets with a title block
  • Circuit table
  • Also a multi-line schematic
  • Symbol legend
Try the switchboard demo Start for free

What is on the sheets

Circuit details you can work from

The sheet shows what each circuit supplies, where the load is, which cable feeds it and how it is protected.

  • Number, load, location, cable, protection
  • Residual current groups drawn as branches

A title block with your company

Every sheet has a frame and a title block with your logo, the project, the drawing name, the date, the sheet number and a field for your stamp and signature.

  • Spread a large switchboard across sheets with clear references instead of shrinking it to an unreadable scale.
  • Each switchboard of the project on its own sheets

Circuit schedule and symbol legend

After the drawing sheets come the circuit schedule, with the sheet number of every circuit, and a legend of the symbols used.

  • Circuits grouped by residual current device
  • Only the symbols that appear on the sheets

Multi-line schematic from connections saved in the switchboard

The multi-line schematic draws every conductor separately from the terminal connections you made: incoming cores, the PEN split into N and PE, every pole and the cores of each outgoing cable.

  • The phase of each circuit as connected
  • Same sheets, title block and stamp field

How it works

  1. Design the switchboard

    Automatically or by hand.

  2. Check the symbols

    Symbols can be assigned to the modules automatically.

  3. Generate the PDF

    Choose the language and your company elements.

Sheets from the demo project

Click a sheet to see it in full size.

  • Single-line schematic Drawing sheet with the circuit table
  • Symbol legend The last page of the set
  • Multi-line schematic Every conductor drawn

The schematic follows the switchboard

Change the switchboard and generate the sheets again. Nothing has to be redrawn.

Questions about schematics

Do I have to draw the schematic?

No. The schematic is generated from the switchboard and circuit data. You check the result and download the PDF.

Why is a module missing from the schematic?

The schematic contains modules that have a symbol in their details. You can set it by hand or let DINPanel assign the symbols automatically.

What about several switchboards?

Each switchboard gets its own sheets. A feeder names the switchboard it supplies, and the sub-board names its parent switchboard and feeder circuit.

In which format do I get the schematic?

As a PDF on landscape drawing sheets, in the language you choose, with your logo and stamp when you set them.

Generate your next schematic in DINPanel

Design a switchboard in the demo, no registration.

Try the switchboard demo Start for free